The 3 way of maintenance is to make your 广东快乐10分 heating system 5 years longer.
2018-04-02 15:35:51 Category：Industry information Visits
【Introduction】With the warmer temperatures across the country, the heating season is coming to an end. As many families in Lanzhou do not use heating equipment at this time of the season, many households will be suspicious at this time: for families like some independent heating, does the heating system in the 广东快乐10分 need continuous maintenance and maintenance after the heating ends.
With the warmer temperatures across the country, the heating season is coming to an end. As many families in Lanzhou do not use heating equipment at this time of the season, many households now have the doubts that the heating system in the 广东快乐10分, like some independent heating families, needs continuous maintenance and maintenance.
For this problem we proposed, Xiaobian technical staff Bonuoan, given a positive answer. It is very necessary to check and maintain the heating system at the end of the heating season. This method can eliminate the potential hidden dangers of the system. Second, we can check and repair some slight and leaking minor phenomena. The third can also improve the efficiency of the heating system, and ensure that the users can enjoy comfortable heating in the coming year.
What should we do in maintenance and maintenance? The suggestion is that everyone can ask the manufacturer's professional after-sale service, of course, in order to save the expenses, you can also do it yourself. As long as the following three steps are done, you can make your 广东快乐10分 heating system more than 5 years more time!
Now let's take the commonly used water heating system and gas wall hanging oven as an example to give you a brief introduction of maintenance techniques.
Maintenance of the first step: check
After stopping heating, the temperature of the heating equipment is reduced. Due to the thermal expansion and contraction, it may cause leakage at the pipe interface and valve. If there is only slight leakage at the interface, a towel can be used to absorb water, which will not damage the floor and walls in the short term. If the leakage is serious, it is necessary to contact the property or ground heating company as soon as possible.
The key to the inspection is: the radiator
If the radiator gap and the surface have ash or oil pollution, can use a soft towel or brush, with daily detergent, weak alkaline soap water and other cleaning and cleaning, can not use any organic solution. For heating, hot water, serious deformation, low efficiency radiator, it is recommended to change as soon as possible.
Maintenance second steps: cleaning
1. Cleaning filter net
The general process is to open the filter of the heating system first, remove the filter net for cleaning, and check whether the filter network is damaged or blocked. If there is any damage, a new filter network with the same size and model needs to be replaced. Carefully remove the filter screen and prevent debris from entering the pipe.
2. Pipeline cleaning
Although the heating pipeline is in a closed environment, it is very rare to enter the ash, but if it is not cleaned regularly, it is easy to breed bacteria, and the long-term use of rust, mud, bacteria algae and so on, these will clog the pipe. The normal heating pipes are cleaned once every 2-3 years. The commonly used methods of floor heating cleaning include chemical cleaning, projectile cleaning, jet cleaning, and physical impulse cleaning.
3. Maintenance of wall hanging furnace
The main operation of hanging wall furnace maintenance includes three steps: fan fire ash cleaning, heat exchanger scaling and air tightness inspection.
Maintenance third steps: full water maintenance
This is a very important step, whether it is the central heating system or the 广东快乐10分 independent heating system, whether it is steel heater, cast iron heater or copper aluminum composite radiator, should be full of water maintenance. Full water maintenance can isolate oxygen, reduce oxygen content in water, prevent oxygen corrosion and prolong the service life of heating system components.
The specific measures of full water maintenance can be divided into three steps.
1, first release the water in the gas wall hanging furnace pipe network, and clean the pipe network.
2, then reboot the heating system, inject water into the pipe network, the water in the heating system to 60 C, and maintain 1 ~ 1.5h, then open the system exhaust valve, and discharge the air from the water outside the system;
3. After the exhaust is completed, all the valves in the system are closed and the heating system is closed so that the water is cooled gradually so that the water is kept in the system pipe network until the next heating period begins. If heating is not used in second years, the water in the pipe network should be drained out, so that the pipeline will be cracked by the low temperature.
Title：The 3 way of maintenance is to make your 广东快乐10分 heating system 5 years longer. URL：http://www.flightxd.com/en/news/848.html